Double Hang vs Single Hang for Apparel Stores

Double hang vs single hang for apparel stores is density versus hem clearance. Double hang puts two rails on the same wall or rack so shirts and trousers share a bay. Single hang is one rail, garments at full length. Independent retailers in Thailand often double-hang everything because the wall looked empty. The shops that convert double the size run and keep dresses on a single rail.

This is the split. Hangrail height is the millimetres once you have chosen. Clothing racks vs slatwall is which fixture carries the hang.

What each hang is for

Single hang is for dresses, coats, long tailoring, and anything that must not fold over a second bar. The lower third of the wall can be a shelf, a bag ledge, or air. Air is allowed.

Double hang is for shirts, tees, trousers, shorts, and kids’ when you need metres without a second wall. The lower rail is still a hang, not a dump. Hem clearance to the floor — and between rails — belongs on the quotation.

Do not double-hang a midi and call it efficient. Do not single-hang a wall of tees and waste the room you paid for. T-shirts often want faceouts plus a lower packed rail, which is a cousin of double hang — face-out vs shoulder-out.

Floor racks follow the same split. A four-way is usually short stories, not double hang. A long straight rail can be double if the garments are short.

When to choose which

Kids fixture heights if children are the customer. We do not publish a universal millimetre. Floor finish, hem length, and a plinth change the number. Write it — Thai or English.

Mall height caps can kill double hang that looked fine on a street wall — mall vs street, landlord restrictions.

Accessories on the same wall

Slatwall accessories: the grooves must land both rails. Panel layout before you order sheets. Faceouts sit with the upper story, not as a third hang that eats the walk.

Empty lower grooves after a single hang are unfinished unless you specified a shelf or accepted air. Specify.

Common mistakes

• Double hang for coats.
• Single hang for a tee wall in 40 sqm.
• One split for kids and adult on the same rail.
• Copying a lookbook that has no lower rail because the studio floor is not your shop.

What belongs on the quotation

1. Single or double per wall, named.
2. Height to each rail from finished floor.
3. Matching split on floor rails if they carry the same garments.
4. Mall height cap if any.
5. Language of the document, Thai or English.

Send shop type, the longest garment, and whether you sell kids. That is enough to specify the split instead of installing two rails that fight the hem.

Double the size run, not the dress

If you are fitting an apparel shop in Thailand, choose single vs double per wall, then write the heights. Send the shop type, the size, and the opening month through the fixture plan form. We will return one fixture schedule and one written quotation — Thai or English — covering both rails and the walk.